#BlackSmithSundays

Instagram photos and videos

#blacksmithsundays#blacksmithlife#forgedinfire#blacksmithing#bladesmith#forgeteverything#forgeworld#blacksmithgiveback#forgestar#blacksmiths#blacksmithartist#bladesmithing#blacksmithforge#blades#blacksmithartstudio#forging#blacksmith#blacksmithart#blacksmithhammer#blacksmithplover#blacksmithandco#blacksmithshop

Hashtags #BlackSmithSundays for Instagram

Here's a different take on a framing hammer. It has a taller rectangular face that is generously crowned. It's quite forward heavy to help sink bigger nails with ease. The claws are short and sharp. #hammer #blacksmith #toolporn #carpenter #forge #forged #madeinmilwaukee #metalart
Reposted from @cergolforge

#forgeworld #blacksmithsundays #forging #blacksmithing #blacksmithhammer #blacksmithplover #blades #blacksmithgiveback #forgeteverything #blacksmithandco #bladesmith #blacksmithdesigner #blacksmiths #blacksmithforge #forgestar #blacksmithartist
forgedknife


0

Here's my take on aSwedish pattern cross pain. Finished this one up a while back. The body has been left rough from the forge, the shoulders have been ground and polished to provide some contrast. #blacksmith #forged #toolporn #hammer #madeintheusa
Reposted from @cergolforge
#forging #blacksmithforge #bladesmithing #blacksmithing #bladesmith #blacksmithgiveback #blades #blacksmithartstudio #forgedstrong #blacksmithsundays #blacksmithandco #blacksmithlife #blacksmithtools #blacksmithart #forgeteverything


0

Here's a recently completed dwarven rounding hammer with some forged in roping to spruce it up. The bronze temper colors has been left on the head, and the faces polished back to white.
Reposted from @cergolforge
--------- #forges #blacksmithsundays #blacksmithartist
forgedknife #blacksmithshop #forgestar #blacksmithhammer #blacksmithdesigner #bladesmith #blacksmiths #forgedstrong #forgeteverything #blacksmith #blacksmithforge #forgeworld #blacksmithartstudio #blades #blacksmithgiveback #blacksmithandco #blacksmithing #blacksmithtools #blacksmithlife


0

Here's a simple "hand and a half" size hatchet made with an offset blade for hewing. I wanted to try out a new form I had in mind so didn't bother to clean up the hammer marks...Though it's not usually my preference, I don't mind them on this piece. I usually prefer tidier forging, but sometime highlighting the forging process can be a nice alternative. #axe #hammer #broadaxe #blacksmith #blacksmithing #toolporn #madeinmilwaukee #madeinusa #anvil
Reposted from @cergolforge

#blacksmithforge #forgedinfire #forgeteverything #blacksmithgiveback #blacksmithartstudio #blacksmithhammer #forgestar #blades #blacksmithsundays


0

It's beginning to look a lot like Christmasโ€ฆThis is how us blacksmiths decorate our โ€œtreesโ€. These are some of the anvils I have kicking around the shop for sale, so I thought what better way to get into the holiday spirit! These are a bit heavier than your average Fir or Spruceโ€ฆ

The tree on the right, bottom to top;
-20โ€ swage block-490, with 419 cast iron stand
-704 South German double horn with side shelf -397 South German double horn with side shelf -290 South German double horn with side shelf -70 German double horn PFP
total weight: 2,370

The tree on the left, bottom to top:
-623 Mousehole
-583 Peter Wright
-375 Brooks
-165 Peter Wright
-34 Calvary pattern
-10 Forged Stephenson Co.
-3 Fisher
total weight: 1,793
Reposted from @cergolforge
--------- #forgedinfire #forgeworld #blacksmithartist
forgedknife #blacksmithartstudio #blacksmithdesigner #blacksmithandco #forges #forgeteverything #bladesmith #blacksmithart #blacksmithhammer #blacksmithforge #forging #blacksmithtools #forgedstrong #forgestar #blacksmithshop #blacksmithgiveback #blacksmithing #bladesmithing #blacksmithlife #blacksmithplover #blacksmithsundays #blades


0

Finishing up one last batch of tools for the holidays. Claw hammers in various weights, and decorated forging hammers, as well as a couple of hatchets. These will all be listed on the website early next week.
Reposted from @cergolforge
--------- #blacksmithlife #blacksmithforge #blacksmithtools #bladesmithing #blacksmithhammer #blacksmithart #forgeteverything #blacksmithing #blacksmithdesigner #forges #bladesmith #blacksmiths #forgestar #forgedstrong #blacksmithartstudio #blacksmithsundays #blacksmithartist
forgedknife #blacksmithshop #blacksmithplover #blades #forgedinfire


0

Forge welded from 12 separate pieces, this 20 pound anvil has been quite a pleasurable challenge to execute. A few welding heats are still needed, mainly on the face, as it's just tacked for now. It also needs a few cleanup heats as well, but the forging is mostly done. Then onto the decorative work. I hope to have it finished in the next little while. This is based off of several 18th century French anvils. This boxy style was quite prominent for well over a century of use in France. I will post some pics of the extant pieces I used for inspiration in the coming days.
Reposted from @cergolforge

#forgestar #blacksmithhammer #blacksmithtools #blacksmithartstudio #bladesmithing #blacksmithlife #blacksmithandco #forgedinfire #blacksmithsundays #blacksmithforge #blades #forges #blacksmithing #bladesmith #blacksmith #blacksmithartist
forgedknife #blacksmithshop #forgeworld


0

Something a bit different than my norm...a gravity fed rocket stove I made for a friend. 5" square wall tuning. I'm no fabricator! My fit and finish on fabricated parts leaves a bit to be desired, but at the end of the day, they're still functional. It's all a learning process though. The day I haven't learned something is the day that I'm dead.
Reposted from @cergolforge
--------- #forges #forgeteverything #blacksmithsundays #blacksmithlife #blacksmiths #blacksmithartstudio #blacksmithdesigner #blacksmithhammer #blades #bladesmithing #forgestar #forgedinfire #forgedstrong #blacksmithandco #forgeworld #blacksmithtools #bladesmith #blacksmithplover #blacksmithshop #blacksmithartist
forgedknife #blacksmithgiveback #blacksmithforge


0

MONSTER 842 pound forged North German pattern anvil. Being offered for sale at $1 a pound. Interested parties contact us at nevergonnahappen@nowayinheck.com
Happy April fools day everyone. ๐Ÿ˜
๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚
๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜
๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ
Reposted from @cergolforge

#blacksmithartstudio #forgeworld #blacksmithsundays #blacksmithtools #blacksmithplover #blacksmithforge #blacksmithhammer #bladesmith #forgedinfire #blades


0

I love big vises! This is a Holland's 18 (8" wide jaws) on the original rail road base. The vise stand combo are over 1,000 pounds. The vise and stand are both stamped AT & SF RR. Atchison Topeka and Santa Fe Rail Road. The vise riding piggy back is a Starrett 326 a 215 pound 6" vise.
Reposted from @blacksmithtools
--------- #forges #blacksmithplover #blacksmithartstudio #blacksmithhammer #blades #blacksmithart #blacksmithdesigner #forging #bladesmithing #blacksmithgiveback #blacksmithshop #forgestar #forgedstrong #forgeteverything #blacksmithforge #forge #blacksmithandco #blacksmithlife #blacksmithsundays #blacksmiths #blacksmithing #bladesmith #blacksmithartist
forgedknife #forgedinfire


0

These are pictures I took before harvesting these hammers out of this barn. They had been sitting there unused for over 25 years....I have already rebuilt each of them and sent them all across the US and they are all being used again!
Reposted from @blacksmithtools
--------- #blacksmithartist
forgedknife #forgedinfire #forgestar #blacksmithforge #forges #blacksmiths #blacksmithsundays #forge #blacksmithdesigner #blades #blacksmithlife #blacksmithplover #bladesmith #blacksmithgiveback #blacksmithart #forgedstrong #blacksmithartstudio #forgeworld #blacksmithandco #blacksmithing


0

And it's Done! Very happy with this one! It's been a while since I did an Otzi. The blade is forged 3" long, 5/32" thick and forged from 1095. The handle is Red Oak with brass pins and an epoxy soaked jute wrapping. The overall length is 7.5". I'd love to hear what you think! This one is a commission piece, but if you'd like to place an order let me know!

#wilderforge #blacksmith #bladesmith #knifemaker #customknife #customknives #bushcraft #woodcraft #madeintheusa
Reposted from @wilderforge

#forgestar #bladesmithing #blacksmithsundays #blacksmithartstudio #blacksmithshop #forgedinfire #blacksmithart #blacksmithhammer #blacksmithforge #blacksmithplover #blacksmithartist
forgedknife #blacksmithgiveback #forging #forgeteverything #forges


0

SOLD
Hereโ€™s a lovely 298 pound forged French double horn โ€œPigโ€ anvil. So called due to itโ€™s four individual feet, low squat body and adorable curly tailโ€ฆhorn. Forged in France in 1837.

So what makes up a French anvil? Well first of all, there are many different styles of French anvils. Single horn, double horn, hornlessโ€ฆetc. Some have feet, some have a solid body, some are a completely different shape altogether, there is too many to accurately list. In the case of the โ€œpigโ€ style, it is usually identified by a few trademark characteristics; The (four) individual feet, a very short and stout body, a very wide face, and quite stout and robust horn(s). Compared to a 298# โ€œLondon patternโ€ this anvil is likely 2-3โ€ shorter. It also has a face that is likely 2โ€+ wider as well. Many French โ€œPigsโ€ have (cursive) writing on the front stating who the maker was as well as the town of manufacture, and the year and usually the weight in kilograms.
This anvil has a drop down to both horns. Rebound is good and the face is clean with minor pitting. It has a side exit hardie hole and a pritchel hole on the square horn. The edges are very clean and useable. The front of it has a lovely chased โ€œmustacheโ€ around the feet and a elegant crease forged in above it. Dated 1837, and also stamped 137K for Kilograms. (1KG = 2.2 pounds) There is faint stamping of where a makers named was in cursive, though itโ€™s difficult to read.
This anvil is for sale, $1900 obo. Located in Milwaukee, WI. Local pickup is welcome, or we can arrange shipping on your dime. Interested persons please email us at cergolforge@hotmail.com for additional pics.
Reposted from @cergolforge
#blacksmithgiveback #blacksmithing #forgestar #bladesmith #blacksmiths #blacksmithsundays #forgeteverything #blacksmithlife #forgedstrong #blacksmithart #forgeworld #forgedinfire #bladesmithing #forges #forging


0

Here's a Bladesmith type hammer made a while back. I intentionally added some hammer texture to this one. By lightly buffing the raised surfaces and leaving the recesses dark it gives it an antiqued look. #anvil #handforged #toolporn #blacksmithing #blacksmith
Reposted from @cergolforge
#blacksmithgiveback #blacksmithplover #blacksmithandco #forging #forgeteverything #bladesmith #blacksmithlife #blacksmithtools #blacksmithartist
forgedknife #blacksmithsundays


1

What a honor to make the cover of #knifemagazine on the month that marks the 2 year that I have been making knives.. Iโ€™m also the first maker to be featured making a knife and not the finished knife which prove to me we have come along way of appreciating the art form..I could not have done that with out all the support of you all!!!so thank u!! and also to del Corsi for finding me and writing this article and @toymunkee for taking these photo! You can call in a single issue to read my complete story โ€ญ(800) 828-7751โ€ฌ or get a subscription http://www.knifeworld.com/knifemagazine.html #knifemaker #teamcombat #blacksmith #knifenut #knivesdaily #knifeporn #forgedinfire #forgedinfirechampion #knifemaking #forged #knivesofinstagram @bigtimethreads @combatabrasives @whiskeybentleather @nitzanlilie @amkoncepts @coalironworks @texasfarriersupply
Reposted from @rpm_neil

#bladesmithing #blacksmithshop #blacksmithsundays #blades #bladesmith #forgeteverything #blacksmithgiveback


1

What a honor to make the cover of #knifemagazine on the month that marks the 2 year that I have been making knives.. Iโ€™m also the first maker to be featured making a knife and not the finished knife which prove to me we have come along way of appreciating the art form..I could not have done that with out all the support of you all!!!so thank u!! and also to del Corsi for finding me and writing this article and @toymunkee for taking these photo! You can call in a single issue to read my complete story โ€ญ(800) 828-7751โ€ฌ or get a subscription http://www.knifeworld.com/knifemagazine.html #knifemaker #teamcombat #blacksmith #knifenut #knivesdaily #knifeporn #forgedinfire #forgedinfirechampion #knifemaking #forged #knivesofinstagram @bigtimethreads @combatabrasives @whiskeybentleather @nitzanlilie @amkoncepts @coalironworks @texasfarriersupply
Reposted from @rpm_neil

#bladesmithing #blacksmithsundays #blacksmithartstudio #forges #blacksmithshop #bladesmith #blades #blacksmithlife #blacksmithgiveback


2

MONSTER 842 pound forged North German pattern anvil. Being offered for sale at $1 a pound. Interested parties contact us at nevergonnahappen@nowayinheck.com
Happy April fools day everyone. ๐Ÿ˜
๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚
๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜๐Ÿ˜
๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ๐Ÿ˜œ
Reposted from @cergolforge

#blacksmithforge #blacksmithlife #blacksmithgiveback #blacksmithsundays #forgeteverything #forgeworld #bladesmith #blacksmiths #forging #blacksmithing #blacksmith #blacksmithplover #forgedinfire #blacksmithartist
forgedknife #forges #blacksmithhammer #blades #blacksmithart #forgestar #forgedstrong #bladesmithing #blacksmithdesigner


0

SOLD Up for sale is this lovely 358 pound Peter Wright "Yorkshire" pattern.
Double horn anvils are exceptionally versatile, allowing for a wide range of projects. The square horn is the bees knees for working hard to reach areas and supporting smaller work pieces. The round horn is capsule shaped, and is more cylindrical than a normal "swollen" horn of a more typical London pattern. The face has ample room for larger work, and heavy striking. โ€จThis anvil has very faint stamping, but is most assuredly a Peter Wright. A very faint โ€œPATENTโ€ can be seen, which is part of the signature PW stamping. Besides the stone weight marks also being on the correct side for a PW, it also carries the classic PW ledges on the feet, and a 4th handling hole (though plugged) on the front foot. It also has some symbols stamped on the front foot, something PW often did.
The face is very flat with minimal swayback, and fair rebound. There are some very light hammer dings on the face, but nothing to cry over. Besides one chipped area, the edges are very clean and useable. This style of anvil offers a ton of support under the hardie hole for heavy striking work. This would make an excellent shop anvil for those looking for a double horn in the mid size range. โ€จDimensions are as follows: -Face width: 5 3/16โ€ -Overall length: 39โ€
-Height: 13โ€
-Footprint: 13 1/4โ€ X 11 5/8โ€
Located in Milwaukee, WI, local pickup is welcome. We can also arrange shipping on your dime, or deliver to the Quad State blacksmith event in September for a fee. Interested persons please contact us at cergolforge@hotmail.com for additional pics. #anvil #blacksmith #forge #peterwright #toolporn #blacksmithing #hammer #forging
Reposted from @cergolforge
#forgestar #blacksmithplover #blacksmithandco #blades #blacksmithdesigner #blacksmithtools #forgedstrong #blacksmithsundays


0

I did this little guy a while back, and hadn't posted it yet. The blade is 3.5" long, 1/8" thick and forged from 1095 with a really nice forced patina. The handle is Elk antler with brass pins. The overall length of this one is 7.25" long.
This one is available for $215. Let me know what you think!
#wilderforge #blacksmith #bladesmith #handforged #madeintheUSA #knifemaker #customknife #customknives #bushcraftusa #bushcraft #woodcraft
Reposted from @wilderforge

#blacksmithsundays #forges #blacksmithhammer #blacksmithplover #blacksmiths #bladesmithing


0

Here's the reverse side of the Nessmuk I just did. It's forged from 1095 and the handle is made from Rosewood with brass pins and forest green G10 liners.
The blade is 5" ร— 3/16" and the overall length is 9.25". It's available for $230.

Reposted from @wilderforge
--------- #forgeteverything #bladesmithing #bladesmith #blacksmithforge #blacksmithandco #forgedinfire #forgestar #blacksmithdesigner #blacksmithlife #blacksmith #blacksmithartstudio #blacksmithtools #blacksmithplover #forging #forgedstrong #blacksmithing #forgeworld #blacksmithshop #blacksmithgiveback #blacksmithsundays #blades


0

As promised, here's pictures of the finished anvil posted a couple weeks ago. I also made a stand for it to mimic the cast iron stands it's full sized brothers use. #metalsmith #anvil #bladesmith #blacksmith #toolporn #hammer #forge #forged #forging #metalart #madeinusa๐Ÿ‡บ๐Ÿ‡ธ #madeinmilwaukee
Reposted from @cergolforge

#forges #blacksmithartstudio #blacksmithing #blacksmithtools #blacksmithhammer #blacksmithshop #blacksmiths #blacksmithlife #forgeworld #forgedinfire #blacksmithsundays


0

All hail the almighty V block!
Blacksmiths are armed with a massive arsenal of tools, here's a remarkably useful and versatile one.
A V block has many uses. To name a few:
-tapering pipe/forging pipe
-isolations
-swaging triangular shaped pieces
-a support tool to hold other tooling -chamfering
-truing pieces back up to square
-a means of support for square pieces to work on the corners
They can be used by themselves, or in conjunction with top tools or spring tools.
Much of the challenge of forging is figuring out a means of supporting your work piece. A V block supports it on two planes, thus containing it. When used under a power hammer, or hand hammer, there is now three points of contact instead of two. This forces material into self, as opposed to spreading out/widening.
V blocks can be a simple 90 degree V, or any angle under the sun for specific means of support. There is also the very handy tapered V, in which making and cleaning up tapered rounds becomes unbelievably simple.
Many people ask how I do some of the work on the corners/shoulders of my hammers-this is how. Not rocket science, just a simple means of support to allow work to be done on the corners.
As time allows I hope to write more posts on simple tooling, tips and tricks.
#anvil #toolporn #blacksmithing #hammer #forging
Reposted from @cergolforge
#blacksmiths #forgedinfire #blacksmithdesigner #blacksmithart #blacksmithartstudio #blacksmithsundays #blacksmithlife #forges #forgestar #blacksmithgiveback #forgeteverything #blacksmithforge #blacksmithandco #blacksmithartist
forgedknife #blacksmithtools


0

Just wrapped up this commission piece. definitely happy with it. It's always nice when you can get a pair of antler scales to look nice and feel good!
The blade is 4.5" long, 1/8" thick and forged from 80CRV2. The handle is antler with brass pins and lanyard tube. The overall length is 9". I'd love to hear your thoughts!
#wilderforge #blacksmith #bladesmith #handforged #madeintheUSA #knifemaker #customknife #customknives #bushcraftusa #bushcraft #woodcraft
Reposted from @wilderforge
#forging #forgedinfire #blacksmithshop #blacksmithplover #blacksmithing #blacksmithsundays #blacksmithforge #blacksmithdesigner #blacksmithartist
forgedknife #blacksmithlife #forgestar #forgeteverything #forgeworld


1

I made a little more progress on the stake anvil. I decided it needed a little something extra to spruce it up, so I made little "shields" for the sides. These side shields are quite common in extant examples. These will be chased with some ornamentation before being finished. I also started a stump for it. White oak with some gnarly cracks. I made a band for the top, and will glue and screw some 1/8" plate to the bottom to prevent the checking from spreading. I will also chisel some heave chamfers on the corners. This stake/stump will be available once completed. Interested parties please contact us for pricing. #metalsmith #blacksmith #blacksmithing #toolporn #anvil #forge #forged #metalart #madeinusa๐Ÿ‡บ๐Ÿ‡ธ
Reposted from @cergolforge

#blacksmithgiveback #forgedstrong #blacksmithhammer #forgeworld #blacksmithartstudio #blacksmiths #forging #blacksmithartist
forgedknife #blacksmithtools #blacksmithandco #blacksmithlife #blacksmithshop #blacksmithsundays


2

Just finished up this one! It's forged from 80crv2 with a torched hickory handle with brass pins and lanyard tube. It has a leather lanyard with a white tail deer antler bead. This one was a commission piece.
#wilderforge #blacksmith #bladesmith #knifemaker #customknife #madeintheusa
Reposted from @wilderforge

#bladesmithing #blacksmithart #blacksmithartstudio #forgedinfire #blacksmithsundays #forgeworld #forgedstrong #forging #forgestar #blacksmithforge


0

Check out the live stream of @msmbnyc giving me some lesson on knife handling.. education is so important to become a better #knifemaker and to keep creating but working #knives #knifenut #knifeporn #forgedinfire #knivesofinstagram #knifemaking #edc #selfdefense #knifefight #tkamimurablades
Reposted from @rpm_neil

#blacksmithsundays #blacksmithartstudio #blacksmithlife #blacksmith #blacksmiths #blacksmithartist
forgedknife #blacksmithart #blacksmithtools #forgeworld


0

For sale;
Weighing in at 155 pounds, this one is a beaut! So called a โ€œSawyers patternโ€ or โ€œSaw makers patternโ€. Though the name may suggest otherwise, saws were not made on these anvils, but rather tensioned and tuned. The intention being to make the blade run true and accommodate for any stress on the blade running at very high RPMโ€™s. Tensioning the blade involves thinning and/or stretching it in very select areas. Specialized hammers were used for this; A heavily offset hammer with a slightly convex round face, a straight/cross pein combo hammer with quite flat peins, and a double diagonal pein hammer-the peins being 45 degrees from the handle.
This one carries a rather rare name stamp on it: ย RICHD LLOYD & Co ย BIRMINGHAM ย BEST ย IMPROVED ย 79 ย JR

Exceptional quality, and a darn good looking anvil. About as clean as they get. Perfect crisp edges. The face is immaculately clean, and flat. The rebound is off the charts good. The feet match those found on a normal london pattern anvil. The face measures 9โ€ X 5โ€. Besides the obvious use of tensioning saw blades, these anvils have been very popular amongst blade smiths. The large flat face is perfect for heavy forging of blades, and the radiuses edges good for beveling the edge. These anvils also make excellent anvils for striking and any other heavy work as they are so well supported in the base, though they do lack a hardie hole. Beyond that, the large flat face allows ample real estate for coppersmiths and other non ferrous metal workers.
Interested persons please contact us for pricing and additional pics. Located in Milwaukee, WI. Local pickup is always welcome. We can also arrange shipping on your dime. We can also deliver to Quad State for an additional fee.
#anvil #forging #hammer #blacksmithing #toolporn
Reposted from @cergolforge
#blacksmithartist
forgedknife #blacksmithartstudio #blacksmithlife #blacksmiths #blacksmithsundays #blacksmithtools #blacksmithplover #blacksmithshop #bladesmithing #forges #bladesmith #blacksmithandco #forgedinfire #blacksmithforge #blacksmithdesigner #forgestar #forgeworld #forgeteverything


1

Up for sale is a stunning 214 pound โ€œBavarianโ€ pattern anvil. Carried on itโ€™s brow is some wonderful scalloped border ornamentation, as well as a date; 1841.
As we have gone over before, each region had their own pattern of anvil. Swiss, Polish, Bohemian, Bavarian, North German, South Germanโ€ฆ the list goes on and on. Each anvil had itโ€™s own distinct style, traits, and sometimes even function.

So, what makes up a Bavarian pattern? The list below is the typical makeup of one. One might call them an extreme and grotesque version of an Austrian pattern. They carry many of the same features, but more severe in every way. -A heavily angled โ€œbrowโ€ jutting out from the face
-Extra deep and grotesque โ€œchurch windowsโ€
-Stepped feet, usually 2 feet, but sometimes 3. The feet will flare out wider side to side. -They can be hornless, or have one round horn. In rare cases, they can have two horns.
This anvil is for sale; interested persons please email us at cergolforge@hotmail.com for pricing. We can ship reasonably, and local pickup is always welcome.
#anvil #toolporn #metalart #blacksmith #blacksmithing #hammer #forge #forged
Reposted from @cergolforge

#blacksmithsundays #forgedinfire #blacksmithart #forgeteverything #blacksmithandco #blacksmiths #blacksmithartist
forgedknife #blacksmithshop #forging #blacksmithgiveback #blacksmithartstudio #blacksmithlife #bladesmith #blacksmithhammer #blacksmithdesigner #blacksmithtools


0