How to set a conibear trap. Place the trap on the ground, springs on the sides, trigger and dog on top. Pic 2,3,4 Put tension on the springs, using both your hand and a doubled piece of paracord and lark head passing through both loops of the spring, then put spring safety on! Pic 5 place the springs in the middle of the jaws, around the pivots. Pic 6: bring the trigger and dog together, and pic 7 put the dog in the notch of the trigger. Trap is set, at this point the springs safeties can get loose so watch out and NEVER handle the traps through the trigger, you could hurt yourself pretty badly, and don’t try to reset it! If you want to start over, just trigger it with a stick or anything but your limbs... and pic 8/video, crunch! #bushcraft #survival #survie #trapping #trapper #pistagepiegeage #pieges #conibear #traps #handlewithcare and thanks to grierwolfe, I found this nice paracord trick to set the trap safely on his YouTube Channel, check it out!!